The three processes at a glance
A gold or black scoop does not reveal its coating process by color alone. Start with the finish you want, then compare how it looks on the bowl, handle and edges. The table below separates the manufacturing method from the evidence a buyer should request.
| Question | PVD | Powder coating | Paint |
|---|---|---|---|
| How is the layer applied? | A thin film is deposited in a vacuum chamber. | Dry powder is applied and cured with heat. | A liquid coating is applied and cured. |
| How is thickness specified? | By the selected coating system and supplier specification. | By the selected powder system and its application specification. | By the selected paint system and its application specification. |
| Which colors should I discuss? | Our usual choices include gold and black; review the closest available finish against your reference. | A wider palette for matching a brand color; approve a sample. | A wider palette for matching a brand color; approve a sample. |
| What appearance does it give? | A metallic appearance that follows the polished or brushed base surface. | An opaque colored finish, with gloss, matte or texture depending on the system. | A colored finish whose gloss and texture depend on the paint system. |
| Which evidence should I request? | Assessment of the complete surface system, including metal release where relevant. | Formulation documentation and applicable finished-item testing for the intended use. | Formulation documentation and applicable finished-item testing for the intended use. |
The film thickness is a specification for the selected system, not a universal number attached to the process name. A coating supplier’s technical data sheet can help define the application, but the finished scoop still needs its own agreed surface specification and acceptance sample.
PVD: a thin film with a metal appearance
PVD means physical vapor deposition. Coating material is deposited onto a surface in a vacuum to form a thin film. Decorative suppliers offer different coating systems and appearances; Ionbond’s decorative coating portfolio is one example of how color, surface texture and wear properties depend on the chosen system.
Our usual PVD choices are a limited set of finishes, including gold and black. Share your color reference so we can discuss the closest available finish, then approve a physical sample. That is different from saying PVD technology cannot match colors: the available palette depends on the coating system and supplier.
Choose the base finish before approving the color. A polished surface and a brushed surface can give the same nominal color a different appearance because the thin film follows the texture underneath. Our stainless steel finish guide explains those base finishes.
PVD coatings can improve surface wear resistance, but a thin layer can still be damaged by deep scratches. Hardness data for an industrial coating does not predict the service life of every scoop. Evaluate the actual sample, especially its rim and handle edges, and agree how it will be used and cleaned.
Powder coating and paint: a wider choice of colors
Powder coating uses dry powder that is cured into a film; paint starts as a liquid coating. Both offer options for a brand color and an even colored appearance. Powder coatings commonly build a thicker film than decorative PVD, but the exact thickness, gloss and texture belong to the selected formulation and application process.
Give the supplier a color reference and describe the appearance you want, such as a smooth matte finish. Compare the approved color on a complete scoop, not only on a flat color chip: the bowl and handle catch the light differently. Check the coverage at the rim, hanging hole and any transition between surfaces.
For food contact, select the formulation and evidence together. In the United States, FDA 21 CFR 175.300 sets conditions for resinous and polymeric coatings within its scope, including composition and applicable extractives requirements. Ask the supplier and laboratory to match the documentation and test conditions to the intended food and use.
In the EU, Regulation (EU) 2024/3190, as corrected by Regulation (EU) 2026/250, restricts BPA and other hazardous bisphenols and derivatives within its scope, including in food-contact varnishes and coatings. Obtain the applicable declaration of compliance and supporting documentation for the selected coating and intended use.
Match the report to the colored scoop
Our published reports include black and green samples. The capacity, dimensions and weight below come from our model catalog; they are not dimensions measured by these test reports. The report dates are the issue dates, and each result applies to the submitted sample under the conditions in that report.
| Model | Catalog capacity, size and weight | Sample color | Report and issue date | Reported tests | Result |
|---|---|---|---|---|---|
| BS2532 | 10 ml; 128 × 40 × 15 mm; 21 g | Black | 2406Z30254A, 2 December 2024 | Total chromium content for the submitted sample | Pass for the reported test |
| BS2558 | 50 ml; 156 × 50 × 28 mm; 50 g | Black | 2406X55599E, 27 September 2024 | Specific metal migration under CM/Res(2020)9 | Pass under the reported conditions |
| BS2554 | 20 ml; 126 × 40 × 25 mm; 37 g | Green | 2406T33755A, 5 June 2024 | 21 CFR 175.300 chloroform-soluble extractives, total chromium and CM/Res(2013)9 metal migration | Pass; the two extractives results were N.D. |
BS2532 illustrates a narrow test scope: passing a total chromium content test does not establish the safety of a colored coating. That result also cannot identify an exact stainless steel grade. Select the base material separately from the color and finish.
Report 2406X55599E describes a black coated BS2558 scoop. Its metal migration testing used artificial tap water at 40°C for one hour and passed the reported limits. The report identifies a coating, not a PVD, powder coating or paint process; it should be used as an example of testing a coated finished item.
For the green BS2554 sample, the two extractives results in 2406T33755A were N.D., with a reporting limit of 0.5 mg/in². This means below that reporting limit, not zero. The report records testing of the submitted sample; it does not say the laboratory separated and tested the green coating alone.
Use these reports to understand the questions to ask. Match the item, surface specification, intended food, contact temperature and duration to the evidence for your order. The Council of Europe CM/Res references in the reports and US coating requirements answer different questions; our quality documents guide explains how to organize the supporting files.
A repeatable method for comparing colored samples
Compare each candidate using the same light, handling and cleaning method. Record the model, process, color reference and inspection date on a sample sheet, then photograph the same views before and after the agreed checks. This makes later production comparisons more useful than a general instruction to make the color look good.
- Color: place the reference and scoop side by side under the same light. Turn the scoop to compare the bowl and handle from several angles. Use the approved physical sample as the final reference for all three processes.
- Coverage: check the inside and outside of the bowl, rim, handle edges and hanging hole. Record the location of bare spots, uneven color or visible damage so the supplier can evaluate the same area.
- Logo: assess contrast, position and clarity on the colored sample. Laser results depend on the surface and marking settings; approve the actual mark rather than assuming every laser process removes the coating. Compare methods in our logo guide.
- Wear and cleaning: agree the cleaner, cloth or tool, number of cycles and acceptance criteria before starting a comparison. Use the same procedure for each candidate and keep photographs. This sample check complements, rather than replaces, appropriate laboratory testing.
- Packaging fit: try the sample with the intended jar or pouch, including inserting and removing it through the opening. Check whether packing or repeated handling rubs the colored bowl or handle against another item.
- Production reference: retain the approved sample, agreed care instructions and inspection record together. Carry the color, coverage and logo criteria into the order’s AQL inspection plan.
Which finish should you choose?
- Choose PVD when a gold or black metallic appearance and the underlying polish or brushing are central to your design.
- Compare powder coating and paint when matching a brand color or selecting a particular matte, gloss or textured appearance is the priority.
- Specify the stainless steel grade separately. Surface color cannot identify the alloy; use material documentation and the order specification, with our steel grade guide as a starting point.
In our experience, all three processes hold up well in normal use. The practical choice depends on the appearance, the approved sample, the intended use and the supporting food-contact documentation. Keep those decisions together instead of choosing a process name without specifying the finished result.
For brands: approve the scoop as part of the package
Plan the capacity, jar or pouch opening, handle reach, color, logo and packaging together. A finish that looks right on its own still needs to work with your product and the way customers use it. Approve one complete sample and share the same specification with your purchasing, design and inspection teams.
Stock models start from 100 pieces. Regular sample preparation takes 10 days; regular bulk production takes 40 days from payment of the agreed deposit or full amount, with shipping time additional. Plan the stages using our measuring scoop production timeline. Logo samples are charged, and the logo sample fee is refunded when you place the bulk order; shipping costs are not refunded.
Send your model, quantity, color reference, logo artwork and destination market. We reply within 24 hours. Request a quote.
Frequently asked questions
Is PVD coating food safe?
A PVD finish can be specified for food-contact use. Assess the complete coated item for its intended food, contact conditions and market, with supporting documentation and relevant testing. A report describing a coated scoop does not, by itself, identify the coating as PVD.
Is powder coating food safe?
Choose a powder formulation suitable for the intended food-contact use and obtain the applicable documentation and finished-item testing. For US resinous and polymeric coatings within its scope, 21 CFR 175.300 includes composition and extractives requirements. For EU sales, assess the applicable BPA and hazardous bisphenol restrictions in Regulation (EU) 2024/3190 as corrected, alongside the other requirements for the intended use.
Can you match my brand color?
Powder coating and paint offer a wider palette for matching a color reference. Our usual PVD choices include a limited set of finishes such as gold and black; share your reference to discuss the closest available option. Approve the color on a physical scoop before using it as the production standard.
Does PVD coating wear off?
PVD can improve surface wear resistance, but deep scratches can damage a thin coating. Performance depends on the complete surface system and use conditions. Compare the actual sample and follow the agreed care instructions.
Does a black or gold finish identify the stainless steel grade?
No. Color describes the surface appearance, not the alloy underneath. Specify the base material separately and use the material documentation for the selected item.